How to read a ruler
Follow the pictures step by step: what each little mark on a ruler means, then how to read a measurement. Then try it yourself with the guided lesson and practice.
How to read a ruler, step by step
1 Find the inch lines
The longest lines, the ones with numbers, are the whole inches. Between two numbers is one inch, and every inch on the ruler looks exactly the same. Once you can read one inch, you can read all of them. The marks in between split that inch into smaller pieces, and the next steps show each kind.
2 The half inch: the longest mark in between
Halfway between the inch numbers is the longest of the in-between marks. It is the half inch, 1/2". If the end of what you are measuring lands on it, the reading is the inch number and a half, like 1 1/2".
3 Quarter inches: the next longest marks
Halfway between the inch line and the half inch is the quarter inch, 1/4". Halfway between the half and the next inch is 3/4". These are the next longest marks. The half inch is also 2/4, so the quarters go 1/4, 2/4 (1/2), 3/4.
4 Eighths: the short marks
Shorter again are the eighths: 1/8", 3/8", 5/8" and 7/8". They sit halfway between the quarter marks. The even eighths already have simpler names: 2/8 is 1/4, 4/8 is 1/2 and 6/8 is 3/4.
5 Sixteenths: the shortest marks
The shortest marks are the sixteenths: 1/16", 3/16", 5/16" and so on up to 15/16". With these, the inch is split into 16 equal pieces. Every mark on the inch is some number of sixteenths, which is why counting sixteenths always works.
6 Read a measurement: start, count, simplify
- Start at the last inch number before the end of what you are measuring. Here that is 1.
- Count the little marks from that line to the end: 6. That is 6/16.
- Simplify: if the top number is even, halve both numbers until it is odd. 6/16 becomes 3/8.
- Put them together: 1 3/8 inches. You can check it: the arrow is right on the 3/8 mark.
7 Measure from the zero line
Line the start of what you are measuring up with the 0 line, not the very end of the ruler. Some rulers start a little in from the edge. Then read where the other end lands: here it is past the 3 and 7 marks further, so 3 7/16". If the end of your ruler is worn, start at the 1 inch line and take 1 inch off the reading.
Reading a metric ruler
1 Centimetres and millimetres
On the metric side, the numbered lines are centimetres. Each centimetre is split into 10 millimetres by the small marks. The slightly longer mark in the middle is 5 mm, half a centimetre.
2 Read a metric measurement
Start at the last centimetre number (4 cm is 40 mm), count the millimetre marks to the end (7), and add them: 47 mm. The same length can be written 4.7 cm. No fractions to simplify on the metric side.
3 The same reading at normal size
This is the same 47 mm at normal size. The 5 mm marks help you count quickly: 47 is two marks past the 5 mm mark after the 4.
Start here: a 3-step lesson
Try it yourself
Slide the blue bar along the ruler and watch the reading change.
Tips for accurate readings
- Look straight down. Looking from an angle makes the end appear on a different mark (parallax).
- Worn or damaged end? Start the object at the 1 inch or 1 cm line and subtract that from the reading. Carpenters call this burning an inch.
- Stand the ruler on edge so the marks touch the object, which removes most parallax.
Practise reading a ruler
Questions
How many 16ths are in an inch?
Sixteen. Half an inch is 8/16, a quarter is 4/16 and an eighth is 2/16.
How do I read centimetres on a ruler?
Each number is a centimetre and each small line is a millimetre. 4 cm plus 3 small lines is 43 mm, or 4.3 cm.
What is the difference between a ruler and a tape measure?
They are read exactly the same way. A tape is longer and flexible, and its numbers keep counting past 12 inches.
What if my ruler starts a little in from the end?
Measure from the 0 line, not the physical end of the ruler.
Sources
Measure Drill checks every number against these references or works it out from the exact definitions of the units.